Recommended equipment

Video phone on the basis of Android, Yealink SIP-T58V is used as a control device

IP-PBX on the basis of Аsterisk, Yeastar S20  is used as a SIP-server

Tested demo projects from SIP.ZIP, just updated connection parameters to those of IP BOLD intercom located in the same LAN. Established call, sound OK, video OK.

Release 11.

via RS232 GlobalCache

Available functions: choice of presets, volume control, equalizer settings, zone selection, feedback.

It works only partially. It is possible to connect to the device and choose artist and artist's album. But I can choose only artists (in original application I have also album, genre, TuneIn and search).It is not possible to play single track. It always starts play whole album. It is not possible to change the zone.

Sometimes the Sonos RC4 project does not find the Sonos when coming from sleep.

It is controlled via UDP, it controls devices via DMX.

Provides control of lighting via IP to the router system.

Provides control of lighting via IP to the router system.

Provides control of lighting via IP to the router system.

Работают основные, но не все возможные функции. Ждем, что команда iRidium mobile добавит команды PUT и DELETE в HTTP драйвер.

Everything works stably.

Fully functional iRidium server. Work with iRidium pro driver for MQTT is tested.

The following systems are realized: automated watering, lighting control and greenhouse control.

Control of swimming pool and boilerhouse equipment: a standard set of swimming pool automation equipment and a chemical dosing station. Monitoring and saving settings and data via Modbus tcp/ip. Connection was done via openvpn tunnel. 2gi has a built-in client. The server was installed on PC.

It works well with 3G/4G connection!

Integration into a project is possible only with ekey home 1 CP DRM controller.

Integration into a project is possible only with ekey home 1 CP DRM controller.

Integration into a project is possible only with ekey home 1 CP DRM controller.

Integration into a project is possible only with ekey home 1 CP DRM controller.

Integration into a project is possible only with ekey home 1 CP DRM controller.

Tested RTSP stream on 4 cameras through UnifiVideo NVR. Works without problems.

Stable work.
In the settings of the camera address write the following
http://login:parol@222.22.22.222:8080/cgi-bin/viewer/video.jpg?streamid=3
Where the last figure is the number of the stream from 1 to 4.

We have used this media player  runing android 4.2 and connected  by wired ethernet to install an UI in 1920x1080 resolution, to create a big panel, part of a conference and voting system. In this UI we show status of presence and vote  of each one of 61 member of plenarium and Exchanging data through xml files with the ERP system of client. It works  fine with fast response  and  without delay on feedbacks. The entire system is controled by an AMX  NI2100 Netlinx controller

We have developed a JS to control and have feedback. The communications were made over TCP/IP. We took time to discover that if we send the command by direct mode , we need to set disable header as true  in each command to the DSP understand  the command.  Sending the commands  by script mode works fine

We have developed a JS to control and have feedback. The communications were made over TCP/IP. We took time to discover that if we send the command by direct mode , we need to set disable header as true  in each command to the DSP understand  the command.  Sending the commands  by script mode works fine.

Used in combination with a Global Cache iTach Flex with serial adapter, to power on and off the projector

Used in combination with a Global Caché iTach Flex with serial adapter, to power on and off the projector.

Always turn IP control, give static IP manually to avoid miscommunication.

Basic functions and switching between configurations of video walls.

Script module to control the level of volume at the input and output.

Basic functions: switching on/off, choice of the video stream.

Basic functions: switching on/off, volume control.

Basic functions: switching on/off, volume control.

Control via RS232 with the help of Global Cache. Feedback was not set.

Control via RS232 with the help of Global Cache. Feedback was not set.

All matrix switchers working via 2000 and 3000 protocols are supported.

Tested with version 7.

Works with 11 version of iTunes, Later versions are not tested.